Oxygenating Rooms
Power an airtight structure with O2 tanks and ventilators, then enable oxygen and use the build-helper overlay to verify filled rooms.
An oxygenated Base or Vessel requires an O2 Tank, a Ventilator, stored Oxygen, and active power. Place a Ventilator in every connected airtight area that should contain oxygen, fill the O2 Tank, activate the structure through the Control Panel, and enable the O2 option. Every airtight area with an active Ventilator is filled when sufficient oxygen capacity is available.
Use Debug Mode in the Building Helper menu with N to visualize oxygen distribution. If the current O2 supply or tank capacity is too low, oxygenation fails until more Oxygen or additional tanks are added.
Even large rooms fill almost instantly, usually within one or two seconds.
The Oxygen values on the Statistics tab of the Control Panel show room demand, total tank capacity, and the structure's current fill level.
If a compartment is breached, its oxygen is lost. The Ventilator remains active but does not automatically waste oxygen by repeatedly filling the open area.
When a structure is deactivated while its O2 Tanks are already full, oxygen remaining in the rooms cannot be returned to storage and is lost.
See also
Updated 2026-07-27