Airtightness and Hull Breaches
Check block airtightness and use the oxygen debug overlay to locate leaks, breached hulls, or doors that prevent a room from sealing.
A block's airtightness is shown in its tooltip. It can also be checked through the device details in the Control Panel. Many doors are airtight, but not all; airtight doors display a blue containment field while sealing a room. Some stair blocks are also not airtight.
Use the O2 overlay in the Building Helper menu by opening Debug and enabling Show Oxygen. The overlay indicates the nearest route to a leak.
A door's containment field cannot be disabled to allow oxygen flow. Use a non-airtight door or place a Ventilator block in the wall between two rooms instead.
Airtight doors prevent oxygen from flowing into the next room, even while open, because their sealing field retains the atmosphere. The field depends on the structure's global power state. Non-airtight doors do not block oxygen flow, even when closed.
When power is lost, the structure performs a final decompression and transfers room oxygen back into its tanks. Any oxygen that exceeds the available tank capacity is lost. Oxygen is also lost through hull breaches and normal consumption. Ventilators facing open space do not continuously waste oxygen; after the leak is sealed and power is restored, they refill the room.
Armor automatically uses the surrounding atmosphere when it is breathable and stops consuming stored suit oxygen, even while the helmet is equipped. Players inside the structure consume oxygen from its tanks.
Rooms do not have multiple pressure levels. A room either contains oxygen or does not, until the shared tanks are empty.
See also
Updated 2026-07-27