Repair Bays and Templates
A Repair Bay and Console can restore damaged blocks or replace missing parts from a saved template after the required resources are supplied.
A Repair Bay and Repair Console can restore damaged blocks and devices with Repair Blocks. A Tier 2 Repair Bay can also replace missing blocks and devices with Repair to Template. The Console calculates the required materials, which are stored in the Repair Bay. These devices are available for Bases and Capital Vessels.
Required devices:
- Repair Bay Tier 1 or Tier 2
- Repair Console for access
Setup and use:
- Open the Control Panel of the Vessel to be repaired.
- While the Vessel is fully configured and undamaged, select Save Template in the lower-left corner.
- Prepare a Base or Capital Vessel containing both a Repair Console and Repair Bay.
- After the Vessel loses blocks, move it into the Repair Bay area. Repair to Template requires a Tier 2 Bay.
- Access the Repair Console with F by default. The interface displays Vessel information and resource and time requirements.
- Select Repair Blocks or Repair to Template.
- Add the required materials to the intake.
- Select START REPAIR.
General information:
- Repair Blocks consumes one Iron Ingot for every 200 hit points restored.
- A destroyed Repair Bay drops 60% of its stored contents. Upgrading the Bay retains 100% of its contents.
- Materials cannot be added while a repair is in progress.
- Weapon fire striking the repair field damages the Repair Bay.
- The repair area must have enough unobstructed space for the Vessel's full bounding box.
- The repair beam has a range of 8 meters. A platform is not required for a large Vessel, but the Vessel must remain above the virtual ground layer of the repair area. If any section extends below that line, repair does not begin.
- Templates can be protected with a code when saved. The same code is required for Repair to Template.
Stored ingots cannot be withdrawn directly. Removing the Repair Bay drops 60% of them, while upgrading retains all contents. The Repair Console itself can be removed and replaced at any time.
Repair to Template does not restore hit points on damaged blocks. Run Repair Blocks first.
Only one Repair Bay can be installed on a Base or Capital Vessel. A Repair Console is required even when using only the Repair Blocks function.
See also
Updated 2026-07-27